MINI GT Mazda RX-7 #1251 1/64 Diecast Model

Orange and black, split down the middle of the car. That is the whole idea here, and the casting commits to it: the roof, the bonnet, the front bumper, the side graphics and the rear wing are all black, while the wings, the doors, the sills and the rear quarters are a bright solid orange. The bonnet is the longest black surface on the model and it reads as a single continuous panel from the base of the windscreen down to the nose, with the body-colour only appearing at the very front lip.

The shape underneath that paint is a low, wide coupé with a very rounded nose, teardrop lamp covers, and pronounced front arches that swell out past the bonnet line. Body length works out at roughly 7.2 cm at true 1/64, with a height of about 2.0 cm at the roof — a touch lower than most cars in this scale, which suits a car designed this low. The front bumper is the most sculpted piece on the model: a deep, rounded opening flanked by two smaller intakes, with the bumper lettering set into the centre panel.

Black and orange, and the graphic work that connects them

The most interesting design move is the way the black flows down the side. Instead of a simple two-tone split, a black graphic sweeps off the front wing, drops across the door and curls toward the rear arch, so the orange is left as a border around it. It reads as one continuous black shape running the length of the car, and it makes the model look lower than it is because the eye follows the black line rather than the roof.

Chrome five-spoke wheels sit at each corner with a visible polished lip, and they are the only bright metal on the car apart from the small script banner across the top of the windscreen. The mirrors are orange, mounted on short stalks. The rear wing is a substantial black item with a curved top surface and slim endplates, mounted well back over the tail. At the front, the lamp covers are the classic rounded teardrop shape, moulded closed and finished in clear plastic over a dark interior, and there is a small orange marker low on each front corner. The rear of the car carries a black tail panel, round lamp lenses and a script badge on the centre panel.

The script appears in three places — the windscreen banner, the front bumper and the rear panel — and at this size it reads as a logo shape rather than as lettering. If you know the brand you will recognise it instantly; if you do not, you will see a stylised wordmark and nothing more.

A low car needs the right kind of ground

At roughly 2.0 cm tall, this is one of the flatter models you can put on a shelf, and that changes which scenes work. A low car needs a surface with visible edges and structure around it, because there is not much vertical mass to anchor the eye. The Old Warehouse Street View at 19.7 x 10 x 10 cm is a good compact choice: it is one of the smallest footprints in the range, so a single low car fills it properly rather than getting lost, and the street frontage gives the model a backdrop at the right height.

The Japanese Train Station scene, 29.5 x 20 x 13.5 cm, is the other strong pairing. A station platform implies a road car waiting at the kerb rather than a track car in a pit, and the 20 cm depth lets you place this car at a slight angle so both the black side graphic and the rear wing face the viewer. It would look out of place on the large two-level parking structures, where 35 cm or 40 cm of empty deck around a single low car makes the scene feel underfilled, and it does not belong on a pit lane at all.

The box, the sealed shell, and the one thing to accept up front

The model ships in a sealed colour box with no display case and no figures. The shell is a single sealed casting: no opening bonnet, no opening doors, and the front wheels do not steer. Given how much of this car's identity is the front-end treatment, that sealed nose means you are buying the silhouette and the paint, not a working model.

The limitation to be clear about: the black bonnet and roof are painted surfaces on the same casting, not separate panels, so the join between the black and the orange is an ink edge rather than a shut line. From any normal viewing distance it looks correct and the edge is clean, but if you run a fingernail along it you will find paint, not a seam, and that is the difference between this and a model with a removable hood. The lamp covers are fixed closed for the same reason, so there is no hint of the mechanical detail underneath. Nothing here is a fault, but it is the honest description of a sealed 1/64 casting.

Handle the car by the body and keep fingers off the chrome wheel faces, which dull faster than the paint. The rear wing is thin and should not be used to lift the model. As with every model on this site, it is a static display piece recommended for ages 14 and over rather than a toy.

Specification	Value
Scale	1/64
Model type	Static diecast model car
Manufacturer	MINI GT
Packaging	Sealed Color Box Packaging
Product type	1/64 diecast model car
Dimensions	6–7 cm long (1/64 scale)
Weight	Approx. 90–120 g (with retail box)
Weight (loose)	Approx. 44–75 g (loose car)
Packaging size	Blister approx. 14 × 19.5 × 5 cm — sealed colour box variant not yet measured
Packaging variant	Licensed movie release: the measured packaging size is the blister variant.
Spec note	Figures are approximate, measured from the manufacturer's posted packaging size and retailer weight data. They will be replaced with values from a physical parcel once stock ships.
Category	Cars

• Included: MINI GT Mazda RX-7 #1251 1/64 Diecast Model in Sealed Color Box Packaging.
• Not included: Display case and figures. These must be purchased separately.

Buy this for someone whose taste runs to wide-body Japanese coupés and who already knows why a black bonnet on an orange car is a deliberate choice rather than a mismatch. It is a car that rewards a bit of prior knowledge: the front-end treatment and the side graphic are the point, and a recipient who recognises them will get more out of the model than someone who just sees a two-tone sports car. It also suits a collector who has mostly race cars and wants one road-going counterpoint on the shelf.

The practical appeal for gifting is that it is visually complete on its own. Orange and black is a strong enough contrast that the model looks intentional on a desk with no base, no case and no lighting rig. If the recipient already builds 1/64 street scenes, pair it with the Old Warehouse Street View and it slots in as the parked car in the shot. If they are new to the scale, the model alone is enough. Recommended for ages 14 and over, so not one for a young child.

Ships in 7–14 business days via tracked international shipping. Import duty is prepaid at checkout for the United States, the European Union, Turkey and Indonesia, so nothing further is due at delivery for those destinations; all other destinations ship duty-unpaid. Read the full shipping guide →

Is the bonnet black paint or a separate part?

Paint. The whole shell is one casting, so the black bonnet, roof and front bumper are finished on the same body as the orange. The transition between the two colours is a printed edge, not a panel gap.

How tall is the model compared with other 1/64 cars?

Around 2.0 cm at the roof, which is slightly lower than the typical 2.0–2.2 cm range for true 1/64 models. That is a fair reflection of how low the real car sits, not a casting error.

Do the front wheels turn?

No. The wheels roll but the front axle does not steer, and the doors and bonnet are sealed. It is a static display model rather than a toy.

Can you read the lettering on the bumper and windscreen?

You can see it is a wordmark and where it sits, but the individual letters are not legible at 1/64 without magnification. It is printed as a logo shape rather than as readable text.

Which diorama should it go in?

A compact street scene. The Old Warehouse Street View at 19.7 x 10 x 10 cm is the best fit for a single low car, and the Japanese Train Station gives more depth if you want to angle it so the side graphic and wing face forward.

Does it come with a case?

No. It arrives in a sealed colour box only. A display case, base and figures all need to be bought separately.

Pair this model with other 1/64-scale models from the Collector Series to build a full miniature city on your desktop.