MINI GT Mercedes-AMG GT3 #1336 1/64 Diecast Model

No single base colour, and that is the point. This GT car is wrapped in a graphic that reads as a patchwork of coloured blocks laid over a white and silver grid: hot pink on the roof and the door tops, lime green across the bonnet and the rear deck, yellow on the front bumper corner and the rear quarter, blue at the extreme edges, and grey-and-white check patterns running through the middle of the design. It is a livery designed to be seen from a distance, and the individual blocks are large enough that the pattern survives the shrink to 1/64 intact.

The body underneath measures roughly 7.2 cm at true 1/64 and stands about 2.1 cm at the roof. It is a long-bonnet, short-deck coupé silhouette with a wide low grille and vertical slats, a curved roof falling into a short tail, and flared arches over the rear wheels. The bonnet has a pair of long louvred vents running down it, the nose carries a large three-pointed emblem in the grille, and there is a deep splitter under the front bumper. The rear is where the aero work shows: a black wing on twin uprights and a black diffuser with prominent vertical fins underneath the tail.

A patchwork of large colour blocks, and how they meet

Because the colour blocks are large rather than fine, this is one of the few cars in this scale where the livery reads exactly the same at arm's length as it does up close. The pink roof panel, the green bonnet section and the check band along the lower flank all hold their shapes. Where the design gets finer — the thin grid lines and the small dashes running through the grey sections — you can see the individual marks, but they are a step softer than the big blocks.

Markings are scattered across the whole car. There is a race number in a white square on the door, with a smaller banner strip above it. A large white wordmark runs along the upper part of the door and the rear quarter on a black panel. There is a script badge on the front wing, a set of small coloured marks on the front bumper, a maker's mark on the rear deck, and a script logo across the top of the windscreen with a number in the corner. The mirrors are bright pink, which ties them to the roof, and the bonnet carries a script mark near its leading edge.

Wheels are black multi-spoke with a distinctive thin-spoke pattern and a visible dish, and the tyres carry a bright band of yellow sidewall lettering — that yellow ring is one of the most noticeable details on the model and it picks up the yellow blocks in the livery. The wing is black with white lettering on its top surface and blue and white detail on the endplates. The rear lamp clusters sit in a black panel above the diffuser fins, and the diffuser itself is a separate moulded piece with deep vertical strakes.

A multicoloured car needs a calm setting

With this much colour on the car, the scene around it has to be restrained or the whole thing becomes noise. The Windowed Multi-Story Parking structure, 35.5 x 18.5 x 22.7 cm, is the strongest pairing: it is one of the tallest scenes in the range, and its windowed facade gives the car a plain grey concrete backdrop with repetitive structure rather than colour. A 2.1 cm car inside a 22.7 cm tall structure also looks appropriately small, which suits a busy livery because the pattern needs to be read as a whole rather than as separate elements.

The Industrial Double-Level Parking, 40 x 22 x 16.2 cm, is the alternative if you want the car in a wider shot. That 40 cm run is the longest open deck in the range, so a multicoloured car will not dominate the frame the way it would on a small base, and the 22 cm depth means you can set it back from the front edge. This is a racing car with a full aero kit, so garage and parking structures are the right context. On a street or storefront scene the patchwork livery turns into visual clutter against signage, and the car stops reading as a coherent object.

In the box, and the one thing that will bother a perfectionist

Sealed colour box, no display case, no figures. The casting is sealed and static: no opening panels, no steerable wheels, nothing removable. The wing and diffuser are fixed in place.

The limitation worth flagging is the mismatch between the print quality of the large blocks and the print quality of the fine details. The big colour panels are clean and sharp with well-defined edges, but the thin grid lines running through the grey sections and the very small script marks are noticeably softer, and in a few places the fine white lines over the grey areas thin out to the point where they almost disappear. It is a small inconsistency on a car where the printing is the entire product, and on a white-and-grey section it is more visible than it would be on a solid dark colour.

Handling is straightforward but the surface is busy and gloss-finished, so fingerprints show. Wipe with a dry microfibre rather than a cloth with solvent on it, and be careful around the pink mirror stalks, which are thin. The yellow tyre lettering is the least durable marking on the model and will wear if the car is rolled across a surface. Static display model recommended for ages 14 and over.

Specification	Value
Scale	1/64
Model type	Static diecast model car
Manufacturer	MINI GT
Packaging	Sealed Color Box Packaging
Product type	1/64 diecast model car
Dimensions	6–7 cm long (1/64 scale)
Weight	Approx. 90–120 g (with retail box)
Weight (loose)	Approx. 44–75 g (loose car)
Packaging size	Retail box approx. 10 × 4.5 × 3.5 cm
Spec note	Figures are approximate, measured from the manufacturer's posted packaging size and retailer weight data. They will be replaced with values from a physical parcel once stock ships.
Category	Cars

• Included: MINI GT Mercedes-AMG GT3 #1336 1/64 Diecast Model in Sealed Color Box Packaging.
• Not included: Display case and figures. These must be purchased separately.

Give this one to someone who likes colour and does not apologise for it. In a collection of silver, grey and black cars, a pink-and-green patchwork GT car is the model people pick up first, and that is a real quality in a gift: it starts conversations. It also works for the recipient who follows modern GT racing and recognises the livery style, because the design is specific enough to be identifiable rather than a generic racing wrap.

The practical case for it as a gift is that it needs nothing else to look good. It is visually complete on a shelf or a desk with no base, and the strong colour blocks make it easy to photograph, which suits anyone who posts their collection. If the recipient has diorama scenes, pair it with the Windowed Multi-Story Parking structure so the car sits against plain concrete rather than competing with a busy street. Worth mentioning before you buy: the fine grid lines in the grey sections are softer than the large colour blocks, so a very detail-focused collector may notice. Ages 14 and over.

Ships in 7–14 business days via tracked international shipping. Import duty is prepaid at checkout for the United States, the European Union, Turkey and Indonesia, so nothing further is due at delivery for those destinations; all other destinations ship duty-unpaid. Read the full shipping guide →

How many colours are on this livery?

Several. The main blocks are pink, lime green, yellow, blue and grey-and-white, arranged as a patchwork over a white and silver base rather than as a single dominant colour with accents.

Does the livery still read clearly at this scale?

Yes, because the colour blocks are large. The fine grid lines and small script marks inside the grey areas are softer and less defined, but the overall pattern holds together at arm's length.

What is the model's size?

True 1/64, so roughly 7.2 cm long and about 2.1 cm tall at the roof. Those are scale figures rather than a measured specification, so allow a little variation either way.

Do the wheels steer, or do the doors open?

No to both. It is a sealed static casting with fixed panels, and the wing and rear diffuser are moulded in place.

What colour are the tyres marked in?

Bright yellow sidewall lettering. It is one of the most visible details on the model and it echoes the yellow blocks in the body livery.

Which scene suits such a busy livery?

Something plain. The Windowed Multi-Story Parking structure gives a grey concrete backdrop and 22.7 cm of height, and the Industrial Double-Level Parking works if you want the car set back in a wider frame.

Pair this model with other 1/64-scale models from the Collector Series to build a full miniature city on your desktop.