MINI GT BMW M4 CS #1213 1/64 Diecast Model

Black cars are the hardest thing to photograph and the easiest thing to get wrong in miniature, and this M4 CS is almost entirely black. What rescues it is texture: a woven carbon pattern across the bonnet, a carbon-weave roof panel, gloss black paint over the shoulders and doors, and dark grey multi-spoke wheels that sit just light enough against the body to be readable. In the photos the car looks less like a flat black shape and more like four or five different blacks stacked on top of each other.

At 1/64 this works out to roughly 7.2 cm long and just over 2 cm tall — a real M4 CS is about 4.8 m nose to tail, which lands right about there. It is a static diecast model with fixed panels, rolling wheels and no steering. The whole car is smaller than a house key.

The front end carries the whole design

Two tall vertical kidney grilles dominate the nose, and MINI GT has given them a thin red outline that traces the frame. On a black car that red line is the single brightest element on the model, and it pulls your eye straight to the centre of the front bumper. Inside the grilles there is a horizontal bar arrangement rather than an open mesh. Above them sit the headlamp units with their internal graphic rendered in a pale gold tone — that warm highlight against black is the second thing you notice, and it is what stops the front of the car from reading as a dark hole.

The bonnet is where the surface detail lives. There is a visible woven pattern across it, lighter than the surrounding paint, plus a raised power dome running down the middle. From a three-quarter front angle that dome catches the light and gives the bonnet a soft highlight, which is exactly what makes the difference between a black car that reads as a shape and one that reads as a silhouette.

Long doors, a low roof, and a boot lid spoiler

The profile is the classic two-door coupé proportion: a long bonnet, a cabin set well back, and a roofline that tapers into the boot. The carbon roof panel is a slightly different black from the painted pillars, which is a nice touch because it lets you trace where the roof ends without needing a colour break. There is a small lip spoiler on the boot lid, a black side skirt along the bottom of the doors, and a dark mirror housing on each side. The wheels are a fine multi-spoke design in a dark grey, with a small blue-and-white centre mark that is only really visible when you get close.

What the photos do not show is much of the interior. You can see through the glass to a pale grey cabin floor and seat shapes, but the dashboard and door cards are essentially dark. If you are the kind of person who opens a model up to look inside, this one does not give you a lot to look at — the outside is where the detail budget went.

A street scene, not a garage

This is a road car, so it belongs on a street or a storefront rather than a pit lane. The Vintage Hotel (653) at 29.7 x 19.7 x 12.5 cm is the pairing I would choose. The 29.7 cm width means a 7.2 cm car sits comfortably with room for a second vehicle at an angle, and the 12.5 cm height gives the low building frontage enough presence that a 2 cm car does not dwarf it. A black car against warm shopfront lighting reads very differently from a black car under a plain white ceiling lamp — the scene gives the paint something to reflect, and reflections are how a black model shows its shape.

If you would rather have a busier scene, the Corner Izakaya (879) at 29.7 x 20 x 13 cm works on the same logic. Either way, keep the car on a surface with some tone to it. Placing a black M4 on a white foam board under a bare bulb flattens it completely and the bonnet weave disappears.

Sealed box, and the one thing to watch

It ships in a sealed colour box. No display case, no stand, no figure. Because the box is sealed, you will not see the paint under your own lighting until you open it, which matters a little more than usual here: black paint shows dust, fingerprints and stray fibres far more than a light colour does, and the gloss surfaces along the shoulder line are the first place you will notice it. A soft brush and a lint-free cloth are worth having before you unpack it.

The concrete limitation is the glass and the front intake treatment. The windows are a single moulded piece, so there is no visible rubber seal around the windscreen and no separate glass thickness at the pillars — it reads as one continuous dark surface from the side. The lower front intakes are solid moulded shapes rather than open apertures, and the kidney grille internals are simplified into bars. On a black car, where there is no colour contrast to distract the eye, those solid shapes are more noticeable than they would be on a brightly painted version of the same casting.

Two smaller notes. The multi-spoke wheel design is fine enough that the spokes read as a texture rather than as individual spokes at arm's length, and the red grille outline is a thin print on a compound curve, so it is crisp from the front and softer as you move around to the side. Neither is a fault; both are the normal trade-offs at this size.

Specification	Value
Scale	1/64
Model type	Static diecast model car
Manufacturer	MINI GT
Packaging	Sealed Color Box Packaging
Product type	1/64 diecast model car
Dimensions	6–7 cm long (1/64 scale)
Weight	Approx. 90–120 g (with retail box)
Weight (loose)	Approx. 44–75 g (loose car)
Packaging size	Retail box approx. 10 × 4.5 × 3.5 cm
Spec note	Figures are approximate, measured from the manufacturer's posted packaging size and retailer weight data. They will be replaced with values from a physical parcel once stock ships.
Category	Cars

• Included: MINI GT BMW M4 CS #1213 1/64 Diecast Model in Sealed Color Box Packaging.
• Not included: Display case and figures. These must be purchased separately.

This one is for the person who likes the understated end of the BMW range. It is not a bright, shouty model — it is a black coupé with a red outline on the grille and a carbon bonnet — and that restraint is exactly the appeal for someone who would rather have a dark, quiet spec than a launch colour. Buy it for a BMW owner, for someone who has spent time choosing between an M4 and the alternatives, or for a desk where a bright racing livery would look out of place.

The reaction is usually tactile rather than verbal. People pick up a black model and turn it in the light, and the moment the bonnet weave and the carbon roof catch at different angles, the car suddenly looks like more than a dark shape. That is a quieter payoff than a bright livery delivers, but for the right person it is a better one, and it makes this a gift that stays interesting on a desk rather than becoming something you stop noticing after a week.

Ships in 7–14 business days via tracked international shipping. Import duty is prepaid at checkout for the United States, the European Union, Turkey and Indonesia, so nothing further is due at delivery for those destinations; all other destinations ship duty-unpaid. Read the full shipping guide →

What colour is the body?

It is a black car — gloss black over the painted panels, with a visible carbon-weave pattern on the bonnet and a carbon-look roof panel. The wheels are a dark grey multi-spoke design.

Does it have opening doors or a bonnet?

No. Every panel is fixed. The wheels roll but do not steer, and there is no opening feature anywhere on the model.

Can you see the interior?

Only in outline. Through the glass you can make out pale cabin shapes, but the dashboard and door cards are dark and the interior is not the detailed part of this casting.

What scale is it and how long is it?

It is 1/64 scale. That puts it at roughly 7 cm long and a little over 2 cm tall, based on the real car being roughly 4.8 m long.

Is the box a display case?

No. The model comes in a sealed colour box with printed artwork. There is no clear case, stand or figure included, and the box is not designed to display the car.

Is it a toy?

No. It is a static diecast display model for ages 14 and over. It is not built to be played with, and small parts such as the mirrors can come loose under handling.

Pair this model with other 1/64-scale models from the Collector Series to build a full miniature city on your desktop.